To ensure that the contents of module 6 in accordance with the aircraft maintenance license regulations are transferred to the students.
Prerequisite(s)
Course Code Course Name…
Corequisite(s)
Course Code Course Name…
Special Requisite(s)
The minimum qualifications that are expected from the students who want to attend the course.(Examples: Foreign language level, attendance, known theoretical pre-qualifications, etc.)
Instructor(s)
Lecturer İbrahim Şahin
Course Assistant(s)
Schedule
MONDAY, 09:00-12:50, Ataköy campus, AK3C121416
Office Hour(s)
MONDAY after class
Teaching Methods and Techniques
expression, discussion, demonstration
Principle Sources
EASA PART 66 MODÜL 7/A
Maintenance Practices-I Lecture Notes
TTS Module 7, Total Training Support Yayınları, Bedfordshire, 2016
Other Sources
Course Schedules
Week
Contents
Learning Methods
1. Week
7.1 Safety Precautions-Aircraft and Workshop Stages of safe working practices including safety precautions to be taken when working with gases, oils and chemicals such as electricity, especially oxygen. Also, including information on extinguishing agents, fire or other hazards that may occur with one or more of these hazards. remedial action instructions to be taken in the event of an accident.
expression, discussion, demonstration
2. Week
7.2 Workshop Applications Maintenance of tools, control of tools, use of workshop materials; Dimensions, clearances and tolerances, standards of workmanship; Calibration of tools and equipment, calibration standards
expression, discussion, demonstration
3. Week
7.3 Tools / Tools Common types of hand tools; Commonly used types of power tools; Operation and use of precision measuring instruments; Lubrication equipment and lubrication methods. Operation, functions and use of electrical general testing equipment.
expression, discussion, demonstration
4. Week
7.6 Fits and Clearances Drill sizes for bolt holes, fit classes; General system for compliance and clearances; Compliance and clearance schedule (table) for aircraft and engines; Bending, torsion and wear limits; Standard methods for checking shafts, bearings and other parts.
expression, discussion, demonstration
5. Week
7.7 Electrical Wiring Internal Connection System (EWIS) Continuity, insulation and bonding techniques and testing procedures; Use of hand and hydraulic bending tools; Testing of bending joints; Removing pins from connectors and inserting pins into connectors; Coaxial cables: Test procedures and assembly precautions; Identification of electrical line types, inspection criteria and damage tolerances. Protection techniques in power lines: Cable protection braid and braid support, cable clamps, shielding techniques (including heat shrink wrap), shielding; EWIS standards for assembly, inspection, repair, maintenance and cleaning.
expression, discussion, demonstration
6. Week
7.8 Riveting Riveted joints/joints, rivet spacing and pitch; Tools used for riveting and dimpling; Examination of riveted joints/joints
expression, discussion, demonstration
7. Week
7.8 Riveting Riveted joints/joints, rivet spacing and pitch; Tools used for riveting and dimpling; Examination of riveted joints/joints
expression, discussion, demonstration
8. Week
Midterm
9. Week
7.8 Riveting Riveted joints/joints, rivet spacing and pitch; Tools used for riveting and dimpling; Examination of riveted joints/joints
expression, discussion, demonstration
10. Week
7.9 Pipes and Hoses Bending and bucking/uncapping aircraft tubing; Inspection and testing of aircraft pipes and hoses; Assembling and connecting/clamping pipes.
expression, discussion, demonstration
11. Week
7.9 Pipes and Hoses Bending and bucking/uncapping aircraft tubing; Inspection and testing of aircraft pipes and hoses; Assembling and connecting/clamping pipes
expression, discussion, demonstration
12. Week
7.10 Springs Inspection and testing of springs.
expression, discussion, demonstration
13. Week
7.10 Springs Inspection and testing of springs.
expression, discussion, demonstration
14. Week
7.11 Bearings Testing, cleaning and inspection of bearings; Lubrication requirements for bearings; Defects in beds and their causes.
expression, discussion, demonstration
15. Week
7.11 Bearings Testing, cleaning and inspection of bearings; Lubrication requirements for bearings; Defects in beds and their causes.
expression, discussion, demonstration
16. Week
-Final
17. Week
-
Assessments
Evaluation tools
Quantity
Weight(%)
Midterm(s)
1
50
Final Exam
1
50
Program Outcomes
PO-1
Having the knowledge of basic principles, rules and laws of aircraft and aerospace systems.
PO-2
The ability of recognizing and using the structural characteristics of the aircraft and the aircraft related maintenanceandtools.
PO-3
Applying the knowledge of basic issues related to aircraft electronics.
PO-4
Technical drawing and know the rules of civil aviation
PO-5
Applying the relevant standards for aircraft maintenance and repairment
PO-6
Aircraft automatic control methods
PO-7
By performing algorithms and programming to set microcontroller circuits
PO-8
Ensuring operatıonal safety of electronic materıal and performing basic measurements
PO-9
The ability of analyzing aircraft electrical-electronic systems, materials and failure
PO-10
Installing digital, analog and power electronics circuits
PO-11
Performıng cyber communıcatıon of control system and settıng sensor systems
PO-12
Applyıng standards and assurance of qualıty, abılıty of usıng foreıgn languages
PO-13
Values of professıonal ethıcs, usıng communıcatıon technologıes and performıng reseaches
PO-14
Performıng first aid /wounded patients İn Case of emergency and protectıng the environment
PO-15
Performing matmatıcs applıcatıons
Learning Outcomes
LO-1
Gain theoretical knowledge about workshop practices
LO-2
Knows dimensions and units.
LO-3
Knows tools and their uses.
LO-4
Knows lubrication equipment
LO-5
Knows the operation, functions and use of general avionics test equipment.